Abin da ake goge bakin karfe

Brushed stainless steel is a wire-like texture on the surface of stainless steel, which is just a processing technology of stainless steel. The surface is matt, and there is a trace of texture on it carefully, but it can't be felt. It is more wear-resistant than the normal bright surface of stainless steel, and looks a little higher-grade.

Tsarin zanen waya zai rasa kaurin farantin bakin karfe zuwa wani matsayi, gabaɗaya 0.1 ~ 0.2mm. Bugu da kari, tunda jikin mutum, musamman tafin hannu, yana da karfi mai karfi na mai da gumi, allon zanen waya na bakin karfe galibi zai bar yatsun hannu a bayyane yayin tabawa da hannu, kuma yana bukatar a goge shi akai-akai.

Most of the stainless steel surface treatments are suitable for polishing, gloss and mirror finish, and there are very few suitable for drawing. These stainless steels suitable for drawing are commonly known as "brushed stainless steel".

Ha00fa10dcfd7466a80486e49f3449e18y

Bakin waya waya zane gabaɗaya yana da abubuwa da yawa: madaidaiciyar tsarin waya, ƙirar dusar kankara, tsarin nailan Hanyar madaidaiciya zaren madaidaiciya tsari ne daga sama zuwa kasa, kuma gabaɗaya ya isa ayi amfani da madaidaicin na'urar zane don motsa aikin gaba da gaba. Tsarin dusar ƙanƙara shine mafi mashahuri yanzu. Ya ƙunshi ofan ofan ɗigo-ɗigo na ɗigo-ɗigo, kuma ana iya amfani dashi tare da sandpaper na kwari don cimma sakamako.

Tsarin nailan ya hada da layi na tsayi daban-daban. Saboda dabaran nailan mai taushi ne a cikin laushi, yana iya nika sassan da ba daidai ba don isa tsarin nailan.

Allon zanen waya gabaɗaya yana nufin yanayin farfajiya tare da sunan gama gari. Tsohon sunan shine jirgi mai sanyi, kuma yanayin shimfidar ya hada da layuka madaidaiciya, layukan bazu (da layuka), rijiyoyi da zaren. Mai launi bakin karfe waya jawo hukumar ita ce fuskar launuka daban-daban da aka samo ta hanyar shafa ruwa mai guba ko aikin sarrafa ion launuka masu launi a kan farfajiyar farfajiya ta katangar karfe.

Hada0c5bf7e8744daa61ac3e284c665a1c

Matsayin Inganci

1. Batun dukkan abubuwan da aka gyara ya zama daidai, kuma karkatar da aka yarda da tsayin kayan itace 1mm.

2. Dole ne a bincika abubuwan haɗin don madaidaiciya kafin a yanka, in ba haka ba dole ne a daidaita su.

3. Yayin walda, wutan lantarki ko waya ya kasance na nau'ikan da ya dace da kayan da za'a saka su, sannan a samar da takardar shaidar ma'aikata.

4. Dole ne a sanya abun a daidai yayin walda.

5. Yayin walda, mahada mai siyarwa tsakanin abubuwan da aka gyara su zama tsayayyu, walda ya kamata ta cika, kuma walda ta walda akan farfajiyar ya zama iri daya, kuma kada a sami wasu ragunan ragunan rami, kosai da ba a kammala ba, fasa, slag, walda kumburi, ƙonewa-ta hanyar, arc scratches, Laifi kamar arc craters da allura mai kama da allura, kuma dole ne babu spatter a cikin waldi yankin.

6. Bayan waldi ya kammala, sai a fitar da dunkulen walda.

7. Bayan an sanya walda an hade su, sai a gyara su da kuma goge su da injin da ke rike da hannu don yin kyan gani da tsafta.


Post lokaci: Mayu-14-2021